EN
Template
CGC-12 gas-insulated ring main unit is a compact SF6-insulated switchgear designed for 12kV three-phase distribution networks. This C-GIS solution features a sealed stainless steel tank filled with SF6 insulating gas, housing all primary live parts for protection against environmental contaminants. Rated for 12kV operation with IP65 enclosure protection, this RMU is specifically engineered for coastal and desert environments where high humidity, salt spray, and sand ingress are common challenges. The maintenance-free sealed pressure system requires no gas handling throughout its service life, making it a reliable choice for utility secondary distribution, renewable energy connections, and infrastructure projects in harsh climatic conditions.
- Overview
- Applications
- Technical Data
- Services
- Quality Control
- Recommended Products
C-GIS CGC-12 SF6 Gas-Insulated Ring Main Unit - 12kV, IP65 Sealed
C-GIS CGC-12 is a compact gas-insulated ring main unit in which the load break switches, earthing switches and busbar are sealed inside a hermetically welded stainless steel tank filled with SF6 at 0.04-0.05 MPa. It delivers the same ring-network switching function as an air-insulated cabinet in roughly half the footprint, and with a level of environmental protection that air insulation cannot match.
WHY SEALED CONSTRUCTION WINS IN THESE MARKETS
In an air-insulated panel, the insulation medium is the air inside the cabinet - so its dielectric strength depends on keeping that air clean and dry. Dust deposits, salt fog, condensation and insect ingress all degrade it, and in Gulf and coastal African installations that degradation is measured in years, not decades. The C-GIS removes the variable entirely: the active parts live in a sealed tank at controlled gas pressure, isolated from the outside environment for the whole service life. The enclosure is rated IP65 - dust-tight and protected against water jets - which is why this technology is specified for coastal substations, desert sites subject to shamal sandstorms, below-grade chambers and flood-prone locations.
SEALED FOR LIFE - NO GAS HANDLING
The tank is sealed for a service life exceeding 20 years with no refilling and no routine gas work. There is no annual top-up, no gas handling equipment on site and no specialist gas technician required. In markets where local maintenance capability is limited, a sealed pressure system that needs no intervention is a significant operational advantage over equipment that assumes skilled periodic servicing.
Buyers in the EU and Eastern Europe should weigh this against F-Gas obligations: SF6 is a fluorinated greenhouse gas subject to reporting, leak-checking and end-of-life recovery requirements. Where those obligations are the deciding factor, the air-insulated HXGN-12 is the appropriate alternative.
THREE-POSITION SWITCHING AND MODULARITY
Each load break switch offers Closed, Open and Earthed positions from a single interlocked mechanism, giving a positive earth with no separate device. Configurations run from two to five switch units in any combination of load break switch, fuse-switch and vacuum breaker cells. Cable connection is by fully screened plug-in elbow connectors rated 200A, 400A or 630A, so there is no exposed live metal at the cable interface - the unit is touch-safe even at ground level in public areas.
MARKET FIT
Serves 11kV Middle East and African networks and 10kV Russian, CIS and Eastern European networks, with 50Hz and 60Hz verification. Stainless steel tank construction resists the salt-laden atmosphere of Gulf coastal and West African installations.
